0
Your shopping cart is empty.
Cart updated
There is no possibility to buy specified quantity of product.

Inquire for bigger amount

Search

0

Product lines

Trademarks

  • BAMBUKO GRINDYS
  • DZIURSKIP
  • CHIMIVER
  • Dasso
  • aMbooo | GS Bamboo Technology & Innovation
  • Fixing Group
  • WAKOL
  • Woca
 

WAKOL PU 215 - 2-component PU parquet adhesive

Out of stock
Inquire

Inquire

Product *
Qty
Name
Email *
Phone
Question *
Inquire
Thank you for your question! We will contact you as soon as possible.
Share on Facebook Pin on Pinterest Share on Twitter Share on Google+
Unit Price:€ 69.00
Code:WAKOL_PU215_12+1.12KG
Weight:13.120 Kg.
Category:Installation products
Trademark:WAKOL
Kainodara:
Grindų skaičiuoklė:
Pack size:12kg + 1.12kg

WAKOL PU 215 Parquet Adhesive

Area of application:

Shear-resistant, 2-component PU parquet adhesive for laying of 10 mm solid wood lam parquet flooring, mosaic parquet, on-edge lamella parquet, strip parquet, multi-layer parquet, solid wood planks, wood-block RE/WE on absorbent and non-absorbent subfloors indoors. WAKOL PU 215 corresponds to DIN EN ISO 17178.
 
Application method:
trowel notch size according to TKB B3, B5, B11, B13 or B15
 
Consumption:
approx. 750-1550 g/m²
 
Airing time:
none
 
Open time:
approx. 90 minutes
 
Pot life:
approx. 80 minutes
 
Storage:
not below +5 °C, sensitive to frost
 
Base:
polyurethane resin

WAKOL PU215 - Shear-resistant, 2-component PU parquet adhesive for laying of 10 mm solid wood lam parquet flooring, mosaic parquet, on-edge lamella parquet, strip parquet, multi-layer parquet, solid wood planks, wood-block RE/WE on absorbent and non-absorbent subfloors indoors. WAKOL PU 215 corresponds to DIN EN ISO 17178.

 
Application method:
trowel notch size TKB B11
 
Consumption:
approx. 1000-1200 g/m²
 
Airing time:
none
 
Open time:
approx. 90 minutes
 
Pot life:
approx. 80 minutes
 
Storage:
not below +5 °C, sensitive to frost
 
Base:
polyurethane resin

 

USAGE

Let the contents of the hardener container completely flow into the resin container andintensively mix both components with a suitable stirring implement for at least 3 minutes until auniform colour is attained and no more streaks can be seen. Apply the adhesive uniformly with a notched trowel, without letting the adhesive pool. Fit the parquet flooring immediately and press it down firmly. Ensure that the underside of eachwooden element is sufficiently coated with adhesive. The laid areas should not be walked on during the first 4 - 6 hours.

The parquet can be sanded and sealed once it has set completely – after 24 hours, understandardised climatic conditions. Clean the tools using the WAKOL RT 5960 Cleaning Cloth immediately after use. After it hasset completely, the adhesive can only be removed by machine.

SUBFLOORS

The subfloor as well as the room climate conditions must meet the requirements of theapplicable standards and data sheets. Subfloors must be permanently dry, solid, level, freefrom cracks, dirt and adhesion-inhibiting substances. Mechanically pre-treat and thoroughly vacuum-clean calcium sulphate screeds according to the manufacturer's specifications or according to the applicable standards and data sheets. We recommend priming concrete subfloors with integrated floor heating. Allow drying time of the primer.

IMPORTANT

Processing not below floor temperature of +15 °C and room temperature of +18 °C, as well asroom humidity preferably between 40 % and 65 %, maximum 75 %. All information is basedon approx. 20 °C and 50 % relative air humidity. In cold weather, warm up all laying materials in a heated room before use. Solid wood lamparquet flooring must not exceed a thickness/width ratio of 1:5. Completely remove spots on sealed surfaces with WAKOL RT 5960 Cleaning Cloths before the adhesive sets. Dried adhesive residue can be only removed by machine.Parquet flooring made of smoked oak must not emit an odour of ammonia before laying. We guarantee the uniform high quality of our products. All data is based on tests and many years of practical experience and refers to standardised conditions. The variety of materials used and the different construction site conditions, which lie beyond our control, preclude anyclaims based on this data. We therefore recommend making sufficient trials. Accompanying flooring manufacturer's instructions and the currently applicable codes must be observed. We gladly provide technical advice.

We currently don't have in stock.

At your request, we can order the glue with our nearest order.


 

Cart

0
Your shopping cart is empty.

Client zone

Forgot password?
Register now and take advantage of all services provided by registered users.
smart foreash
This site uses cookies. They can identify logged-in users, collect statistics, and help to improve browsing experience for each visitor individually.
Learn more about our Privacy Policy
Agree Clear the cookies and exit